diff --git a/assets/effects/sprite-round-corner-crop.effect b/assets/effects/sprite-round-corner-crop-v1.effect similarity index 79% rename from assets/effects/sprite-round-corner-crop.effect rename to assets/effects/sprite-round-corner-crop-v1.effect index 9b4b299..8a444a5 100644 --- a/assets/effects/sprite-round-corner-crop.effect +++ b/assets/effects/sprite-round-corner-crop-v1.effect @@ -1,5 +1,7 @@ // Copyright (c) 2017-2018 Xiamen Yaji Software Co., Ltd. -// 圆角裁剪 +// +// 圆角裁剪（仅支持正方形纹理） +// // 原理：https://www.cnblogs.com/jqm304775992/p/4987793.html // 代码：复制 yanjifa/shaderDemor 的 https://github.com/yanjifa/shaderDemo/blob/master/assets/Effect/CircleAvatar.effect @@ -17,7 +19,7 @@ CCEffect %{ texture: { value: white } alphaThreshold: { value: 0.5 } # 圆角半径 - roundCornerRadius: { + radius: { value: 0.1, inspector: { tooltip: "圆角半径", @@ -77,7 +79,7 @@ CCProgram fs %{ #if ENABLE_ROUNDCORNER uniform RoundCorner { // 圆角半径 - float roundCornerRadius; + float radius; } #endif @@ -97,7 +99,7 @@ CCProgram fs %{ #if ENABLE_ROUNDCORNER // 约束圆角半径范围在 [0.0, 0.5] - float radius = clamp(0.0, 0.5, roundCornerRadius); + float circleRadius = clamp(0.0, 0.5, radius); // 将纹理uv往左上偏移，实现偏移后的坐标系原点在纹理中心 vec2 uv = v_uv0.xy - vec2(0.5, 0.5); @@ -106,8 +108,8 @@ CCProgram fs %{ // abs(uv.x) , abs(uv.y) : 将第二、三、四象限的点都投影到第一象限上，这样子只需要处理第一象限的情况就可以，简化判断 // 0.5 - radius : 计算出第一象限的圆角所在圆的圆心坐标 // (rx, ry) : 偏移映射后的 新的uv 坐标，相对于 第一象限圆角坐在圆心坐标 的相对坐标 - float rx = abs(uv.x) - (0.5 - radius); - float ry = abs(uv.y) - (0.5 - radius); + float rx = abs(uv.x) - (0.5 - circleRadius); + float ry = abs(uv.y) - (0.5 - circleRadius); // 区分 以第一象限圆角所在圆心坐标为原点的坐标的四个象限 // @@ -117,26 +119,26 @@ CCProgram fs %{ // 第四象限 mx = 1, my = 0 // // 当 mx * my 时，只要等于1，那就是标识第一象限（实际对应圆角区域所在矩形），否则就是第二、三、四象限 - float mx = step(0.5 - radius, abs(uv.x)); - float my = step(0.5 - radius, abs(uv.y)); + float mx = step(0.5 - circleRadius, abs(uv.x)); + float my = step(0.5 - circleRadius, abs(uv.y)); // 计算相对uv坐标到圆心的距离 float len = length(vec2(rx, ry)); // mx * my = 0 时，代表非圆角区域，a 值为1，代表完全采用原始纹理的透明度 // mx * my = 1 时，代表园所所在矩形区域 - // step(radius, len) 可以区分出圆角所在矩形区域的 圆角区域 和 非圆角区域 + // step(circleRadius, len) 可以区分出圆角所在矩形区域的 圆角区域 和 非圆角区域 // 其中圆角区域值为0，非圆角区域值为1 // 当为圆角区域时，a 值为1，代表完全采用原始纹理透明度 // 当为非圆角区域时，a 值为0，代表完全透明 // 至此已经实现圆角裁剪 // - // smoothstep(0., radius * 0.01, len - radius) 是用于抗锯齿优化 + // smoothstep(0., circleRadius * 0.01, len - circleRadius) 是用于抗锯齿优化 // 原理：针对点在非圆角区域的情况，针对点在大于「圆半径一点点」地方的区域，进行平滑过渡，以实现抗锯齿 // 其中， - // 「圆半径一点点」用 radius * 0.01 表示（0.01 可自行改变） - // 点在大于圆半径的区域用 len - radius ，此值会在 [0.0, radius * 0.01] 之间时会平滑过渡 - float a = 1.0 - mx * my * step(radius, len) * smoothstep(0., radius * 0.01, len - radius); + // 「圆半径一点点」用 circleRadius * 0.01 表示（0.01 可自行改变） + // 点在大于圆半径的区域用 len - circleRadius ，此值会在 [0.0, circleRadius * 0.01] 之间时会平滑过渡 + float a = 1.0 - mx * my * step(circleRadius, len) * smoothstep(0., circleRadius * 0.01, len - circleRadius); o = vec4(o.rgb, o.a * a); #endif gl_FragColor = o; diff --git a/assets/effects/sprite-round-corner-crop.effect.meta b/assets/effects/sprite-round-corner-crop-v1.effect.meta similarity index 60% rename from assets/effects/sprite-round-corner-crop.effect.meta rename to assets/effects/sprite-round-corner-crop-v1.effect.meta index 4f9bb47..3e3ff59 100644 --- a/assets/effects/sprite-round-corner-crop.effect.meta +++ b/assets/effects/sprite-round-corner-crop-v1.effect.meta @@ -5,11 +5,11 @@ { "glsl1": { "vert": "\nprecision highp float;\nuniform mat4 cc_matViewProj;\nuniform mat4 cc_matWorld;\n\nattribute vec3 a_position;\nattribute vec4 a_color;\nvarying vec4 v_color;\n\n#if USE_TEXTURE\nattribute vec2 a_uv0;\nvarying vec2 v_uv0;\n#endif\n\nvoid main () {\n vec4 pos = vec4(a_position, 1);\n\n #if CC_USE_MODEL\n pos = cc_matViewProj * cc_matWorld * pos;\n #else\n pos = cc_matViewProj * pos;\n #endif\n\n #if USE_TEXTURE\n v_uv0 = a_uv0;\n #endif\n\n v_color = a_color;\n\n gl_Position = pos;\n}\n", - "frag": "\nprecision highp float;\n\n#if USE_ALPHA_TEST\n \n uniform float alphaThreshold;\n#endif\n\nvoid ALPHA_TEST (in vec4 color) {\n #if USE_ALPHA_TEST\n if (color.a < alphaThreshold) discard;\n #endif\n}\n\nvoid ALPHA_TEST (in float alpha) {\n #if USE_ALPHA_TEST\n if (alpha < alphaThreshold) discard;\n #endif\n}\n\nvarying vec4 v_color;\n\n#if USE_TEXTURE\nvarying vec2 v_uv0;\nuniform sampler2D texture;\n#endif\n\n#if ENABLE_ROUNDCORNER\nuniform float roundCornerRadius;\n#endif\n\nvoid main () {\n vec4 o = vec4(1, 1, 1, 1);\n\n #if USE_TEXTURE\n o *= texture2D(texture, v_uv0);\n #if CC_USE_ALPHA_ATLAS_TEXTURE\n o.a *= texture2D(texture, v_uv0 + vec2(0, 0.5)).r;\n #endif\n #endif\n\n o *= v_color;\n\n ALPHA_TEST(o);\n\n #if ENABLE_ROUNDCORNER\n\n float radius = clamp(0.0, 0.5, roundCornerRadius);\n\n vec2 uv = v_uv0.xy - vec2(0.5, 0.5);\n\n float rx = abs(uv.x) - (0.5 - radius);\n float ry = abs(uv.y) - (0.5 - radius);\n\n float mx = step(0.5 - radius, abs(uv.x));\n float my = step(0.5 - radius, abs(uv.y));\n\n float len = length(vec2(rx, ry));\n\n float a = 1.0 - mx * my * step(radius, len) * smoothstep(0., radius * 0.01, len - radius);\n o = vec4(o.rgb, o.a * a);\n #endif\n gl_FragColor = o;\n}\n" + "frag": "\nprecision highp float;\n\n#if USE_ALPHA_TEST\n \n uniform float alphaThreshold;\n#endif\n\nvoid ALPHA_TEST (in vec4 color) {\n #if USE_ALPHA_TEST\n if (color.a < alphaThreshold) discard;\n #endif\n}\n\nvoid ALPHA_TEST (in float alpha) {\n #if USE_ALPHA_TEST\n if (alpha < alphaThreshold) discard;\n #endif\n}\n\nvarying vec4 v_color;\n\n#if USE_TEXTURE\nvarying vec2 v_uv0;\nuniform sampler2D texture;\n#endif\n\n#if ENABLE_ROUNDCORNER\nuniform float radius;\n#endif\n\nvoid main () {\n vec4 o = vec4(1, 1, 1, 1);\n\n #if USE_TEXTURE\n o *= texture2D(texture, v_uv0);\n #if CC_USE_ALPHA_ATLAS_TEXTURE\n o.a *= texture2D(texture, v_uv0 + vec2(0, 0.5)).r;\n #endif\n #endif\n\n o *= v_color;\n\n ALPHA_TEST(o);\n\n #if ENABLE_ROUNDCORNER\n\n float circleRadius = clamp(0.0, 0.5, radius);\n\n vec2 uv = v_uv0.xy - vec2(0.5, 0.5);\n\n float rx = abs(uv.x) - (0.5 - circleRadius);\n float ry = abs(uv.y) - (0.5 - circleRadius);\n\n float mx = step(0.5 - circleRadius, abs(uv.x));\n float my = step(0.5 - circleRadius, abs(uv.y));\n\n float len = length(vec2(rx, ry));\n\n float a = 1.0 - mx * my * step(circleRadius, len) * smoothstep(0., circleRadius * 0.01, len - circleRadius);\n o = vec4(o.rgb, o.a * a);\n #endif\n gl_FragColor = o;\n}\n" }, "glsl3": { "vert": "\nprecision highp float;\nuniform CCGlobal {\n vec4 cc_time;\n\n vec4 cc_screenSize;\n\n vec4 cc_screenScale;\n\n vec4 cc_nativeSize;\n\n mat4 cc_matView;\n mat4 cc_matViewInv;\n mat4 cc_matProj;\n mat4 cc_matProjInv;\n mat4 cc_matViewProj;\n mat4 cc_matViewProjInv;\n vec4 cc_cameraPos;\n\n vec4 cc_exposure;\n\n vec4 cc_mainLitDir;\n\n vec4 cc_mainLitColor;\n\n vec4 cc_ambientSky;\n vec4 cc_ambientGround;\n};\nuniform CCLocal {\n mat4 cc_matWorld;\n mat4 cc_matWorldIT;\n};\n\nin vec3 a_position;\nin vec4 a_color;\nout vec4 v_color;\n\n#if USE_TEXTURE\nin vec2 a_uv0;\nout vec2 v_uv0;\n#endif\n\nvoid main () {\n vec4 pos = vec4(a_position, 1);\n\n #if CC_USE_MODEL\n pos = cc_matViewProj * cc_matWorld * pos;\n #else\n pos = cc_matViewProj * pos;\n #endif\n\n #if USE_TEXTURE\n v_uv0 = a_uv0;\n #endif\n\n v_color = a_color;\n\n gl_Position = pos;\n}\n", - "frag": "\nprecision highp float;\n\n#if USE_ALPHA_TEST\n \n uniform ALPHA_TEST {\n float alphaThreshold;\n }\n#endif\n\nvoid ALPHA_TEST (in vec4 color) {\n #if USE_ALPHA_TEST\n if (color.a < alphaThreshold) discard;\n #endif\n}\n\nvoid ALPHA_TEST (in float alpha) {\n #if USE_ALPHA_TEST\n if (alpha < alphaThreshold) discard;\n #endif\n}\n\nin vec4 v_color;\n\n#if USE_TEXTURE\nin vec2 v_uv0;\nuniform sampler2D texture;\n#endif\n\n#if ENABLE_ROUNDCORNER\nuniform RoundCorner {\n\n float roundCornerRadius;\n}\n#endif\n\nvoid main () {\n vec4 o = vec4(1, 1, 1, 1);\n\n #if USE_TEXTURE\n o *= texture(texture, v_uv0);\n #if CC_USE_ALPHA_ATLAS_TEXTURE\n o.a *= texture2D(texture, v_uv0 + vec2(0, 0.5)).r;\n #endif\n #endif\n\n o *= v_color;\n\n ALPHA_TEST(o);\n\n #if ENABLE_ROUNDCORNER\n\n float radius = clamp(0.0, 0.5, roundCornerRadius);\n\n vec2 uv = v_uv0.xy - vec2(0.5, 0.5);\n\n float rx = abs(uv.x) - (0.5 - radius);\n float ry = abs(uv.y) - (0.5 - radius);\n\n float mx = step(0.5 - radius, abs(uv.x));\n float my = step(0.5 - radius, abs(uv.y));\n\n float len = length(vec2(rx, ry));\n\n float a = 1.0 - mx * my * step(radius, len) * smoothstep(0., radius * 0.01, len - radius);\n o = vec4(o.rgb, o.a * a);\n #endif\n gl_FragColor = o;\n}\n" + "frag": "\nprecision highp float;\n\n#if USE_ALPHA_TEST\n \n uniform ALPHA_TEST {\n float alphaThreshold;\n }\n#endif\n\nvoid ALPHA_TEST (in vec4 color) {\n #if USE_ALPHA_TEST\n if (color.a < alphaThreshold) discard;\n #endif\n}\n\nvoid ALPHA_TEST (in float alpha) {\n #if USE_ALPHA_TEST\n if (alpha < alphaThreshold) discard;\n #endif\n}\n\nin vec4 v_color;\n\n#if USE_TEXTURE\nin vec2 v_uv0;\nuniform sampler2D texture;\n#endif\n\n#if ENABLE_ROUNDCORNER\nuniform RoundCorner {\n\n float radius;\n}\n#endif\n\nvoid main () {\n vec4 o = vec4(1, 1, 1, 1);\n\n #if USE_TEXTURE\n o *= texture(texture, v_uv0);\n #if CC_USE_ALPHA_ATLAS_TEXTURE\n o.a *= texture2D(texture, v_uv0 + vec2(0, 0.5)).r;\n #endif\n #endif\n\n o *= v_color;\n\n ALPHA_TEST(o);\n\n #if ENABLE_ROUNDCORNER\n\n float circleRadius = clamp(0.0, 0.5, radius);\n\n vec2 uv = v_uv0.xy - vec2(0.5, 0.5);\n\n float rx = abs(uv.x) - (0.5 - circleRadius);\n float ry = abs(uv.y) - (0.5 - circleRadius);\n\n float mx = step(0.5 - circleRadius, abs(uv.x));\n float my = step(0.5 - circleRadius, abs(uv.y));\n\n float len = length(vec2(rx, ry));\n\n float a = 1.0 - mx * my * step(circleRadius, len) * smoothstep(0., circleRadius * 0.01, len - circleRadius);\n o = vec4(o.rgb, o.a * a);\n #endif\n gl_FragColor = o;\n}\n" } } ], diff --git a/assets/effects/sprite-round-corner-crop-v2.effect b/assets/effects/sprite-round-corner-crop-v2.effect index 8c59f66..bd6f330 100644 --- a/assets/effects/sprite-round-corner-crop-v2.effect +++ b/assets/effects/sprite-round-corner-crop-v2.effect @@ -1,5 +1,7 @@ // Copyright (c) 2017-2018 Xiamen Yaji Software Co., Ltd. +// // 圆角裁剪（支持任意宽高纹理） +// // 原理： // 1. 正方形纹理的圆角原理参考 https://www.cnblogs.com/jqm304775992/p/4987793.html // 2. 正方形纹理的圆角代码参考 yanjifa/shaderDemor 的 https://github.com/yanjifa/shaderDemo/blob/master/assets/Effect/CircleAvatar.effect diff --git a/assets/materials/sprite-round-corner-crop.mtl b/assets/materials/sprite-round-corner-crop-v1.mtl similarity index 83% rename from assets/materials/sprite-round-corner-crop.mtl rename to assets/materials/sprite-round-corner-crop-v1.mtl index a1346a7..279cad8 100644 --- a/assets/materials/sprite-round-corner-crop.mtl +++ b/assets/materials/sprite-round-corner-crop-v1.mtl @@ -10,7 +10,5 @@ "USE_TEXTURE": true, "ENABLE_ROUNDCORNER": true }, - "_props": { - "roundCornerRadius": 0.1 - } + "_props": {} } \ No newline at end of file diff --git a/assets/materials/sprite-round-corner-crop.mtl.meta b/assets/materials/sprite-round-corner-crop-v1.mtl.meta similarity index 100% rename from assets/materials/sprite-round-corner-crop.mtl.meta rename to assets/materials/sprite-round-corner-crop-v1.mtl.meta diff --git a/assets/materials/sprite-round-corner-crop-v2.mtl b/assets/materials/sprite-round-corner-crop-v2.mtl new file mode 100644 index 0000000..e8c7371 --- /dev/null +++ b/assets/materials/sprite-round-corner-crop-v2.mtl @@ -0,0 +1,14 @@ +{ + "__type__": "cc.Material", + "_name": "", + "_objFlags": 0, + "_native": "", + "_effectAsset": { + "__uuid__": "7c24b57e-e819-4fc9-a8d2-b06cf61b782d" + }, + "_defines": { + "USE_TEXTURE": true, + "ENABLE_ROUNDCORNER": true + }, + "_props": {} +} \ No newline at end of file diff --git a/assets/materials/sprite-round-corner-crop-v2.mtl.meta b/assets/materials/sprite-round-corner-crop-v2.mtl.meta new file mode 100644 index 0000000..c7d5f5d --- /dev/null +++ b/assets/materials/sprite-round-corner-crop-v2.mtl.meta @@ -0,0 +1,6 @@ +{ + "ver": "1.0.2", + "uuid": "a86e8864-5390-443f-b41b-b38e9d584c43", + "dataAsSubAsset": null, + "subMetas": {} +} \ No newline at end of file diff --git a/assets/scenes/RoundCornerCropV1EffectScene.fire b/assets/scenes/RoundCornerCropV1EffectScene.fire new file mode 100755 index 0000000..6b49e68 --- /dev/null +++ b/assets/scenes/RoundCornerCropV1EffectScene.fire @@ -0,0 +1,1868 @@ +[ + { + "__type__": "cc.SceneAsset", + "_name": "", + "_objFlags": 0, + "_native": "", + "scene": { + "__id__": 1 + } + }, + { + "__type__": "cc.Scene", + "_objFlags": 0, + "_parent": null, + "_children": [ + { + "__id__": 2 + } + ], + "_active": false, + "_components": [], + "_prefab": null, + "_opacity": 255, + "_color": { + "__type__": "cc.Color", + "r": 255, + "g": 255, + "b": 255, + "a": 255 + }, + "_contentSize": { + "__type__": "cc.Size", + "width": 0, + "height": 0 + }, + "_anchorPoint": { + "__type__": "cc.Vec2", + "x": 0, + "y": 0 + }, + "_trs": { + "__type__": "TypedArray", + "ctor": "Float64Array", + "array": [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 1, + 1, + 1 + ] + }, + "_is3DNode": true, + "_groupIndex": 0, + "groupIndex": 0, + "autoReleaseAssets": false, + "_id": "6c351889-b6c8-409f-b36c-4263b06d0b23" + }, + { + "__type__": "cc.Node", + "_name": "Canvas", + "_objFlags": 0, + "_parent": { + "__id__": 1 + }, + "_children": [ + { + "__id__": 3 + }, + { + "__id__": 5 + } + ], + "_active": true, + "_components": [ + { + "__id__": 41 + }, + { + "__id__": 42 + } + ], + "_prefab": null, + "_opacity": 255, + "_color": { + "__type__": "cc.Color", + "r": 252, + "g": 252, + "b": 252, + "a": 255 + }, + "_contentSize": { + "__type__": "cc.Size", + "width": 960, + "height": 640 + }, + "_anchorPoint": { + "__type__": "cc.Vec2", + "x": 0.5, + "y": 0.5 + }, + "_trs": { + "__type__": "TypedArray", + "ctor": "Float64Array", + "array": [ + 480, + 320, + 0, + 0, + 0, + 0, + 1, + 1, + 1, + 1 + ] + }, + "_eulerAngles": { + "__type__": "cc.Vec3", + "x": 0, + "y": 0, + "z": 0 + }, + "_skewX": 0, + "_skewY": 0, + "_is3DNode": false, + "_groupIndex": 0, + "groupIndex": 0, + "_id": "a286bbGknJLZpRpxROV6M94" + }, + { + "__type__": "cc.Node", + "_name": "Main Camera", + "_objFlags": 0, + "_parent": { + "__id__": 2 + }, + "_children": [], + "_active": true, + "_components": [ + { + "__id__": 4 + } + ], + "_prefab": null, + "_opacity": 255, + "_color": { + "__type__": "cc.Color", + "r": 255, + "g": 255, + "b": 255, + "a": 255 + }, + "_contentSize": { + "__type__": "cc.Size", + "width": 0, + "height": 0 + }, + "_anchorPoint": { + "__type__": "cc.Vec2", + "x": 0.5, + "y": 0.5 + }, + "_trs": { + "__type__": "TypedArray", + "ctor": "Float64Array", + "array": [ + 0, + 0, + 351.60631393648214, + 0, + 0, + 0, + 1, + 1, + 1, + 1 + ] + }, + "_eulerAngles": { + "__type__": "cc.Vec3", + "x": 0, + "y": 0, + "z": 0 + }, + "_skewX": 0, + "_skewY": 0, + "_is3DNode": false, + "_groupIndex": 0, + "groupIndex": 0, + "_id": "fbL5wf1mhFa6PPZbeZvnZ9" + }, + { + "__type__": "cc.Camera", + "_name": "", + "_objFlags": 0, + "node": { + "__id__": 3 + }, + "_enabled": true, + "_cullingMask": 4294967295, + "_clearFlags": 7, + "_backgroundColor": { + "__type__": "cc.Color", + "r": 0, + "g": 0, + "b": 0, + "a": 255 + }, + "_depth": -1, + "_zoomRatio": 1, + "_targetTexture": null, + "_fov": 60, + "_orthoSize": 10, + "_nearClip": 1, + "_farClip": 4096, + "_ortho": true, + "_rect": { + "__type__": "cc.Rect", + "x": 0, + "y": 0, + "width": 1, + "height": 1 + }, + "_renderStages": 1, + "_alignWithScreen": true, + "_id": "adItdqNzZHbYUhDAmfCr9b" + }, + { + "__type__": "cc.Node", + "_name": "Content", + "_objFlags": 0, + "_parent": { + "__id__": 2 + }, + "_children": [ + { + "__id__": 6 + }, + { + "__id__": 9 + }, + { + "__id__": 29 + } + ], + "_active": true, + "_components": [ + { + "__id__": 40 + } + ], + "_prefab": null, + "_opacity": 255, + "_color": { + "__type__": "cc.Color", + "r": 255, + "g": 255, + "b": 255, + "a": 255 + }, + "_contentSize": { + "__type__": "cc.Size", + "width": 960, + "height": 640 + }, + "_anchorPoint": { + "__type__": "cc.Vec2", + "x": 0.5, + "y": 0.5 + }, + "_trs": { + "__type__": "TypedArray", + "ctor": "Float64Array", + "array": [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 1, + 1, + 1 + ] + }, + "_eulerAngles": { + "__type__": "cc.Vec3", + "x": 0, + "y": 0, + "z": 0 + }, + "_skewX": 0, + "_skewY": 0, + "_is3DNode": false, + "_groupIndex": 0, + "groupIndex": 0, + "_id": "faqYlnbttBCaJJgkn4Ntv/" + }, + { + "__type__": "cc.Node", + "_name": "Bg", + "_objFlags": 0, + "_parent": { + "__id__": 5 + }, + "_children": [], + "_active": true, + "_components": [ + { + "__id__": 7 + }, + { + "__id__": 8 + } + ], + "_prefab": null, + "_opacity": 255, + "_color": { + "__type__": "cc.Color", + "r": 27, + "g": 38, + "b": 46, + "a": 255 + }, + "_contentSize": { + "__type__": "cc.Size", + "width": 960, + "height": 640 + }, + "_anchorPoint": { + "__type__": "cc.Vec2", + "x": 0.5, + "y": 0.5 + }, + "_trs": { + "__type__": "TypedArray", + "ctor": "Float64Array", + "array": [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 1, + 1, + 1 + ] + }, + "_eulerAngles": { + "__type__": "cc.Vec3", + "x": 0, + "y": 0, + "z": 0 + }, + "_skewX": 0, + "_skewY": 0, + "_is3DNode": false, + "_groupIndex": 0, + "groupIndex": 0, + "_id": "e2e0crkOLxGrpMxpbC4iQg1" + }, + { + "__type__": "cc.Widget", + "_name": "", + "_objFlags": 0, + "node": { + "__id__": 6 + }, + "_enabled": true, + "alignMode": 0, + "_target": null, + "_alignFlags": 45, + "_left": 0, + "_right": 0, + "_top": 0, + "_bottom": 0, + "_verticalCenter": 0, + "_horizontalCenter": 0, + "_isAbsLeft": true, + "_isAbsRight": true, + "_isAbsTop": true, + "_isAbsBottom": true, + "_isAbsHorizontalCenter": true, + "_isAbsVerticalCenter": true, + "_originalWidth": 200, + "_originalHeight": 150, + "_id": "89IA6P0/5JEZERosKJJo6k" + }, + { + "__type__": "cc.Sprite", + "_name": "", + "_objFlags": 0, + "node": { + "__id__": 6 + }, + "_enabled": true, + "_materials": [ + { + "__uuid__": "eca5d2f2-8ef6-41c2-bbe6-f9c79d09c432" + } + ], + "_srcBlendFactor": 770, + "_dstBlendFactor": 771, + "_spriteFrame": { + "__uuid__": "410fb916-8721-4663-bab8-34397391ace7" + }, + "_type": 1, + "_sizeMode": 0, + "_fillType": 0, + "_fillCenter": { + "__type__": "cc.Vec2", + "x": 0, + "y": 0 + }, + "_fillStart": 0, + "_fillRange": 0, + "_isTrimmedMode": true, + "_atlas": null, + "_id": "2azjUbJNxALLAfDZrJ8TV0" + }, + { + "__type__": "cc.Node", + "_name": "Controller", + "_objFlags": 0, + "_parent": { + "__id__": 5 + }, + "_children": [ + { + "__id__": 10 + } + ], + "_active": true, + "_components": [ + { + "__id__": 27 + }, + { + "__id__": 28 + } + ], + "_prefab": null, + "_opacity": 255, + "_color": { + "__type__": "cc.Color", + "r": 255, + "g": 255, + "b": 255, + "a": 255 + }, + "_contentSize": { + "__type__": "cc.Size", + "width": 576, + "height": 60 + }, + "_anchorPoint": { + "__type__": "cc.Vec2", + "x": 0.5, + "y": 1 + }, + "_trs": { + "__type__": "TypedArray", + "ctor": "Float64Array", + "array": [ + -192, + 320, + 0, + 0, + 0, + 0, + 1, + 1, + 1, + 1 + ] + }, + "_eulerAngles": { + "__type__": "cc.Vec3", + "x": 0, + "y": 0, + "z": 0 + }, + "_skewX": 0, + "_skewY": 0, + "_is3DNode": false, + "_groupIndex": 0, + "groupIndex": 0, + "_id": "d0PWmVX95D3LEcvBQBPDr+" + }, + { + "__type__": "cc.Node", + "_name": "RadiusSlider", + "_objFlags": 0, + "_parent": { + "__id__": 9 + }, + "_children": [ + { + "__id__": 11 + }, + { + "__id__": 14 + }, + { + "__id__": 23 + } + ], + "_active": true, + "_components": [ + { + "__id__": 26 + } + ], + "_prefab": null, + "_opacity": 255, + "_color": { + "__type__": "cc.Color", + "r": 255, + "g": 255, + "b": 255, + "a": 255 + }, + "_contentSize": { + "__type__": "cc.Size", + "width": 576, + "height": 60 + }, + "_anchorPoint": { + "__type__": "cc.Vec2", + "x": 0.5, + "y": 0.5 + }, + "_trs": { + "__type__": "TypedArray", + "ctor": "Float64Array", + "array": [ + 0, + -30, + 0, + 0, + 0, + 0, + 1, + 1, + 1, + 1 + ] + }, + "_eulerAngles": { + "__type__": "cc.Vec3", + "x": 0, + "y": 0, + "z": 0 + }, + "_skewX": 0, + "_skewY": 0, + "_is3DNode": false, + "_groupIndex": 0, + "groupIndex": 0, + "_id": "669o93+gJMWJFGUDKSDUJ7" + }, + { + "__type__": "cc.Node", + "_name": "SliderDescLabel", + "_objFlags": 0, + "_parent": { + "__id__": 10 + }, + "_children": [], + "_active": true, + "_components": [ + { + "__id__": 12 + }, + { + "__id__": 13 + } + ], + "_prefab": null, + "_opacity": 255, + "_color": { + "__type__": "cc.Color", + "r": 255, + "g": 255, + "b": 255, + "a": 255 + }, + "_contentSize": { + "__type__": "cc.Size", + "width": 144, + "height": 40 + }, + "_anchorPoint": { + "__type__": "cc.Vec2", + "x": 1, + "y": 0.5 + }, + "_trs": { + "__type__": "TypedArray", + "ctor": "Float64Array", + "array": [ + -144, + 0, + 0, + 0, + 0, + 0, + 1, + 1, + 1, + 1 + ] + }, + "_eulerAngles": { + "__type__": "cc.Vec3", + "x": 0, + "y": 0, + "z": 0 + }, + "_skewX": 0, + "_skewY": 0, + "_is3DNode": false, + "_groupIndex": 0, + "groupIndex": 0, + "_id": "d9MLgZpaFCEZu70E0LAUbn" + }, + { + "__type__": "cc.Label", + "_name": "SliderDescLabel